Friction » Used Friction Machines
Used Friction Machines

Corsteel also offers quality refurbished friction machines at very economic prices.

Please check this section regularly to find out about our best deals in used machines.

Used 75 Ton Single Layer Preform Press

This is a refurbished 75 single layer, down acting, four post preform press rebuilt in our facilites.


Used 330Ton 6 Daylight Cure Press

Take advantage of these machines originally manufactured by us, and refurbished to our quality standards !


Used Grinder-Slotter-Chamfer

Refurbished Grinder-Slotter-Chamfer.

The Slotter/Chamfer/Grinder machine is designed to replace the three single operation machines needed to slot, chamfer, and grind brake pads. It also replaces the slower multi-function reciprocating machines. Any of the three functions may be performed independently of the other operations. The chain conveyor speed is adjustable for finer cuts or greater production speeds.

Used Vertical Grinder 36 Inches

Check out this 36 inches vertical grinder refurbished and tested OK at an affordable price !

This vertical surface grinder was specifically designed to grind the surface of brake pads. This machine will grind all loose brake pads as well as flat backed IM parts in a loose fixture. IM parts with protrusions on the plate will need individual fixtures for each brake part.


Used Slotter-Chamfer

The Slotter/Chamfer machine is designed to chamfer compound and simple angles. This operation is accomplished using two chamfer wheels with angles as indicated in the specifications section.

The machine is designed to perform a maximum of 3 slots per brake pad. The conveyor speed is adjustable for finer cuts or greater production speeds.The machine is also semi-automatic. An operator must place the parts on the fixtures in the correct orientation. The fixtures are attached to a chain conveyor that will carry the parts through the cutting zone.

©2024 Corsteel Hydraulics Web Design and Development by Superior Web Solutions