This 200-Ton press is a four-post down-acting press designed specifically for the stamping industry. This system is also designed to work automatically without supervision with the exception of an operator periodically refilling the magazine with backing plates.
Standard Features
The Press components can be summarized in the following table:
DESCRIPTION
FUNCTION
1
MOVING PLATEN
This is attached to the main ram. It is designed to attach the stamping tooling using T slots.
2
TIE RODS
These provide guidance for the moving platen and secure the top plate to the bottom platen.
3
MAIN RAM
Develops the tonnage for the pressing process.
4
POWER UNIT
This unit supplies hydraulic power to the ram and ejector cylinders.
5
FLUID TRAY
This is designed to contain and drain the excess cutting fluid which is used for stamping
Options
â–ª Electrical plug inside panel
â–ª Water valve
â–ª Improved pushbutton panel layout
â–ª Batch count and totalizer
â–ª Electronic softstarter (250 ton only)
â–ª Integrated hydraulic power unit for minimal floor print area
Specifications
GENERAL
MACHINE DIMENSIONS (APPROX.) (W x D x H)
92” x 76" x 104"
WEIGHT (APPROX.)
13000 LBS. (TANK EMPTY)
DAYLIGHT
1
DAYLIGHT CLEARANCE
21"
CLEARANCE BETWEEN POSTS
14" X 24”
CYLINDER BORE
14"
STROKE
6"
MAXIMUM PRESSURE
2600 PSI (MAIN PRESSURE)
1500 PSI (AUXILIARY PRESSURE)
RESERVOIR CAPACITY
195 US GALLONS
PRESS TONNAGE
MAX. 200 TONS
WATER COOLER
8 GAL. / MIN. (MINIMUM) @ 85 °F. ADJUST FLOW RATE WITH RISE IN TEMPERATURE.
